Home /Products /Glove /Anti-cut Resistant and Anti- impact Gloves /Insulated Corded Cotton Work Gloves /
Insulated Corded Cotton Work Gloves
Trustloops000067
Material: Corded Cotton + Spandex
Size：S/M/L/XL/2XL
Feature：Insulated Corded
Size：S/M/L/XL/2XL
Feature：Insulated Corded
minimum order
1000 pairs
Country of Origin
China
Quantity
US $15.95 - US $15.95 / pairs
Contact Now
add to cart
- Insulated
- Reinforced thumb saddle
- Tear and abrasion resistant
- puncture-resistant
| SIZE | PALM WIDTH(A-B) |
| XXS (5) | 2⅛ in or less (5.4cm or less) |
| XS (6) | 2⅛ - 2½ in (5.4 - 6.6cm) |
| S (7) | 2½ - 3 in (6.6 - 7.6cm) |
| M (8) | 3 - 3⅜ in (7.6 - 8.7cm) |
| L (9) | 3⅜ - 3⅞ in (8.7 - 9.8cm) |
| XL (10) | 3⅞ - 4⅜ in (9.8 - 11.1cm) |
| XXL (11) | 4⅜ - 4¾ in (11.1 - 12.1cm) |
| XXXL (12) | 4¾ - 5¼ in (12.1 - 13.3cm) |
|
REMARK:
IRONCLAD PERFORMANCE WEAR
|
|
1.Cleaning Instructions
Hand wash using soap and clean water at a temperature not exceeding 65°C, gently rubbing to remove dirt. Avoid using strongly alkaline detergents or corrosive solvents (e.g., gasoline, banana oil) for cleaning, as they may damage the material structure or reduce insulation performance.
Hand wash using soap and clean water at a temperature not exceeding 65°C, gently rubbing to remove dirt. Avoid using strongly alkaline detergents or corrosive solvents (e.g., gasoline, banana oil) for cleaning, as they may damage the material structure or reduce insulation performance.
2.Drying Instructions
After cleaning, allow to air dry naturally in a cool, well-ventilated area. Do not expose to direct sunlight or use high-temperature drying methods, as this may cause material aging and hardening. Once dry, apply talcum powder or slaked lime powder to prevent adhesion and maintain flexibility.
3.Treatment of Special Stains
If gloves are contaminated with stubborn stains such as paint or tar, it is recommended to use a specialized cleaner for localized treatment, followed by immediate and thorough rinsing. Do not allow cleaning agents to remain on the surface for extended periods.
4.Usage and Storage Precautions
Inspect gloves before each use for signs of damage, hardening, or moisture;
Store away from oil, acids, alkalis, and heat sources; keep in a dry, ventilated environment (temperature: -15°C to 30°C, humidity: 50%–80%);
Do not store together with corrosive substances.
Store away from oil, acids, alkalis, and heat sources; keep in a dry, ventilated environment (temperature: -15°C to 30°C, humidity: 50%–80%);
Do not store together with corrosive substances.
Applications: Oil Rigging, Mechanical, Mining, Framing, Automotive, and Electrical
Total comments(0)
Write A Reviews
All Stars
- All Stars
- 5Stars
- 4Stars
- 3Stars
- 2Stars
- 1Stars
Recently Updated
- Recently Updated
- Highest Rating
- Lowest Rating
- Most Helpful
Related Blogs
Comprehensive score